3
Hardware Installation
Quick Setup
Hardware connection
The aviation connector is used to connect the equipment.
When installing, please insert the aviation plug into the aviation receptacle, make sure
that the pins are inserted into the receptacle properly, then twist the metal lock ring
clockwise, and then complete the installation after hearing a "click".
When releasing the plug, please twist the plug counterclockwise and pull the plug away
from the receptacle.
Note:
After being powered on, the equipment needs about half an hour to warm up and adapt
to the ambient temperature, before it can accurately and stably measure temperature.
Tips:
You can power on the equipment first, and then read this quick guide.
