Basic Operations
X Board
23
Editing Patches
The editable program functions are accessed using the labelled keyboard keys.
To Edit a Patch:
1. Press the
Edit button
. The Edit LED illuminates.
2.
Select the desired Function
to be edited by pressing one of the marked key-
board keys. (The Velocity Curve is being edited in the example below.)
3.
Adjust the value of the parameter
using the data slider or using the numeric
keyboard keys. The Enter button will be flashing.
4. Press
Enter
to confirm the operation. Press
Home
to cancel the operation.
5. Remember to
Store
the Patch or your changes will be lost when the X Board is
turned off.
See page 22.
Scrolling Text Display
In the Edit menu, the 3-digit LED serves double duty as a scrolling text display.
When you first press the Edit button, the word “
SELECt”
scrolls continuously across
the display, prompting you to select an edit parameter by pressing one of the
labelled keys. After an edit parameter is selected, the current value of the parameter
is displayed. After a short delay, the edit parameter name begins scrolling. If you
enter a value, the display stops scrolling.
1
2
4
3
1. Press Edit
2. Select Function
3. Adjust Value
4. Press Enter
Step:
Semitone
Transpose
Semitone
Transpose
Vel
Curve
Select
Vel
Curve
Select
16-Ch.
CC
Number
16-Ch.
CC
Number
Latch
Low
Note
Latch
Low
Note
Latch
High
Note
Latch
High
Note
Save CC
Val in
Patch
Save CC
Val in
Patch
CC Send
On
Recall
CC Send
On
Recall
PGM Send
On
Recall
PGM Send
On
Recall
Bank
Sel
MSB
Bank
Sel
MSB
Bank
Sel
LSB
Bank
Sel
LSB
Send
Prog
Change
Send
Prog
Change
Aftertouch
Aftertouch
Store
Edit
DATA ENTRY / MASTER VOLUME
XBoard mini.book Page 23 Thursday, April 21, 2005 11:09 AM
