1-4 Installing WebCam Go Plus
Inserting or
Changing Batteries
For WebCam Go Plus to function as a portable digital camera when it is disconnected from the
computer, you need to insert two 1.5 V “AAA” alkaline batteries into its battery compartment.
To insert or replace batteries
1. Press the On/Off button to turn off the camera.
2. Flip the camera’s head unit upwards.
3. Hold the camera in one hand and press the bottom
area of the back cover with your thumb until the
catches on the cover are detached from the grooves.
See Figure 1-3.
4. Push and lift the cover outwards.
5. Remove the old batteries (if any).
6. Insert the new batteries according to the directions
shown in the battery compartment.
7. Align the catches on the cover with the respective
grooves in the casing and slide the cover until it
snaps back into place (see Figure 1-4).
Figure 1-3: Removing the back cover of
the camera.
• No batteries are required when
the camera is connected to the
system.
• If the camera is to be
connected to the system for a
long period of time, remove
the batteries to prevent battery
leakage.
• Make sure that you insert the
batteries in the correct
direction. If not, they may leak
and cause damage to the
camera.
• Do not mix old batteries with
new ones or batteries of
different types together.
Figure 1-4: Slipping the back cover of the camera back into place.