29
2. Click
the
Local Services tab.
3. Click
the
Add Serial Service button.
4. In
the
Service Properties dialog box that appears, modify these:
Enter a unique name (less than 99 alphanumeric characters).
Select the appropriate security settings.
Select
Startup if you want the service to start automatically when CREATIVE
BLUETOOTH SOFTWARE initializes.
From
the
COM Port drop-down list, select a communications port that is not
assigned to any other service.
5. Click
OK.
Removing a user-defined Bluetooth Serial Port
1. Open the Bluetooth Configuration Panel by right-clicking the Bluetooth Tray icon
on the Windows system tray. Select Advanced Configuration. The Bluetooth
Configuration Panel is displayed.
2. Click
the
Local Services tab.
3. Select the port you want to remove.
4. Click
Delete.
Note: The Delete button is only available when the Bluetooth Serial Port service or a
user-defined serial port service is selected.
Changing a local service’s properties
Earlier, we discussed about the five property settings that each of the local services would have.
Here, we’ll show you how to change a local service’s properties and what the options are.
To change a local service’s properties:
1. Open the Bluetooth Configuration Panel by right-clicking the Bluetooth Tray icon on
the Windows system tray. Select Advanced Configuration from the submenu. The
Bluetooth Configuration Panel is displayed.
2. Click
the
Local Services tab.
3. Double-click the service name.
4. Select the appropriate boxes or leave them cleared, depending on what you want
CREATIVE BLUETOOTH SOFTWARE to do.
Startup Automatically: enabled by default. When enabled, it starts the service
when CREATIVE BLUETOOTH SOFTWARE initializes. If Startup is disabled,
you can still start the service manually.
Note: To start the service manually at a later time, simply right-click the service
and select Start from the pop-up menu.
Security Connection: enabled by default. When enabled, it using service with
security connection. It requires confirmation by the server operator before a
remote device is allowed to connect to this service. See the detail information
for security type below.
Service Name: enter a service name (no more than 99 alphanumeric
characters) in this field. In most cases, a service name is supplied by default.
However, in environments where there is more than one device of the same