![background image](http://html.mh-extra.com/html/creative/sound-blaster-recon3d-omega-wireless/sound-blaster-recon3d-omega-wireless_user-manual_2680690007.webp)
About Your Hardware 7
Notes
• *Available for selected models of your audio device in some regions.
• Your Sound Blaster I/O Drive comes attached to a 5¼-inch drive bay adapter. For instructions on
removing the drive bay adapter and installing into a 3½-inch drive bay, consult your Quick Start
leaflet.
• Not compatible with the PCI Sound Blaster series of audio cards.
Jack, Connector,
Knob or Button
Description
1.
Auxiliary Line In jacks
Connects to playback devices using an RCA
cable.
2.
THX Trustudio Pro LED
button
Indicates the current mode THX Trustudio mode.
3.
Headphones button
Turns on the headphone as output device.
4.
Speakers button
Turns on the speakers as output device.
5.
Master Volume knob
Controls the volume output on your headphone
or headset. Turn the knob clockwise to increase
the volume and anti-clockwise to decrease the
volume.
6.
Headphone jack
Connects to stereo headphones with a 3.50 mm
(1/8-inch) plug or the headphone plug of your
headset.
7.
Microphone In jack
Connects to microphones with a 3.50 mm (1/8-
inch) plug or the microphone plug of your
headset.
8.
Microphone Volume knob
Controls the microphone gain. Turn the knob
clockwise to increase the microphone gain and
anti-clockwise to decrease the microphone gain.
9.
Creative proprietary
AND_EXT connector
Connects to one end of the analog cable.
Connect the other end to the
AND_EXT
connector on the Sound Blaster
Recon3D Fatal1ty Champion
audio card
.
10.
Creative proprietary
AUX_EXT connector
Connects to the auxiliary cable on the 5
¼-inch
drive bay adapter.
11.
Creative proprietary
DID_EXT connector
Connects to one end of the digital cable.
Connect the other end to the
DID_EXT
connector on the Sound Blaster
Recon3D Fatal1ty Champion
audio card
.