Creative PC-CAM 550, User Manual

Page: 22 / 50

Installing PC-CAM 550 1-11
In Windows XP 1. Do not connect PC-CAM 550 to your computer before installing the
drivers.
If you accidentally begin installation with PC-CAM 550 connected, the Found
New Hardware Wizard dialog box appears. Click the Cancel button.
2. Insert the PC-CAM 550 CD into your CD-ROM drive.
3. Click the names of the drivers and applications you want to install on your
computer.
4. Follow the instructions on the screen to complete the installation. You may be
asked, after an application is installed, if you want to restart your computer. Do
not restart your computer until all the drivers and applications are installed.
5. Connect PC-CAM 550’s USB cable to an available USB port on your computer
(Figure 1-5). Place PC-CAM 550 on top of your computer monitor or another flat
surface. Windows automatically detects the device.
6. When the Found New Hardware Wizard dialog box appears, select Install the
software automatically (Recommended) , and then click the Next button.
Installation will be complete in a while.
7. When three Hardware Installation dialog boxes appear, one at a time, click the
Continue Anyway button.
8. When the PC-CAM 550 Camera Configuration dialog box appears, check the
image in the Video preview pane. If it flickers or displays a series of dark bands,
click the Cancel Flicker button.
9. Click the Finish button, and then restart your computer if you are prompted to
do so.