Creative DSL 7410, Installation Manual

Page: 24 / 33

Installation Guide
Creative DSL USB 7410
RFC 2364
23 of 32
4 FCC REGISTRATION INFORMATION FOR
USERS
This product is compliant and registered with the CFR47-Part 68 of the
Federal Communications Commision (FCC). The FCC requires us to
provide you with the following information:
• Connection to the nationwide telephone network should be made by
using standard modular telephone jacks, type RJ-11.
• This equipment may not be used with Party Line Services or with Coin
Telephone Lines.
• You should provide the FCC registration number and Ringer Equivalent
Number (REN) of this product to your telephone company. The REN is
useful to determine the number of devices you may connect to your
telephone line and still have all of these ring when your telephone
number is called.
• If your telephone equipment causes harm to the telephone network, the
telephone company may discontinue your service temporarily. If
possible, they will notify you in advance. If advance notice is not
practical, you will be notified as soon as possible. You will have an
opportunity to correct the problem, and you will be informed of your
right to file a complaint with the FCC. Your telephone company may
make changes in its facilities, equipment, operations or procedures that
could affect the proper functioning of your product. If such changes are
planned, you will be notified in advance.
• If it is determined that the equipment still fails to operate properly, the
FCC requires that the unit be disconnected from the telephone line until
the problem has been corrected. Repair to this equipment can only be
made by the manufacturer, its authorized agents, or others who are
authorized by the FCC.