Creative DC-CAM 3000Z User Manual Download

Page: 62 / 64

Reference

- Install the USB driver before
you connect the camera to a

connecting to a computer with

Cannot transfer images after

USB cable.

PC.
- Turn on the camera.

- USB driver is not installed.
- Camera is turned off.

If the low-battery indicator
appears on the camera LCD
screen, replace batteries with a

subjects, use the camera to
Normal/Infinity focus mode.

- Hold the camera steady when

- Be sure that there is at least
80cm between the camera

- Use the macro mode to shoot
close-ups images at a

- When shooting distance

- Turn your mode dial to Auto
mode or Manual mode.
- Wait until the flash charging

- Delete images you no longer

This camera can not display

Set the flash to any other mode

appropriatedsetting, NTSC or

- Please use the attached video
cable to connect the camera

- Set the video system to the

Recorded images are not

Images are nor displayed.

The flash doesn't fire.

Image not showing on TV.

saved in memory

full set of new ones.

non-DCF images.

except Off.

to the TV correctly.

PAL for your TV

complete.

the save operation is

Camera power down before

A memory card with non-DCF
images recorded with another
camera is loaded in the
camera.

The flash mode is set to Off.

- There is a problem with the
camera-TV connection.
- Incorrect video system
setting.

Images are blurry or unfocused.

Image is not recorded when
the shutter release button is
pressed.

shooting.

lens and the subject.

distance of 20cm.

- The camerawas moving

can focus.

range over which the camera

- The subject was out of the

when you took images.

finishes

need.

- Memory is full.

- Flash is in charge.

Playback mode.

- The mode dial is set to

Problem

Cause

Action

- The card may be defective.

- Format the card correctly.

- Delete images you no longer

- Insert a new SD card.

- Wait until the flash charges.

mode, Manual mode or Video

- Turn the mode dial to Auto

The camera does not shoot.

need.

mode.

correctly.

- The SD card is nor formatted

- Memory is full.

- The flash is charging.

Playback mode.

- The model dial is set to

- File number over.

Than insert a new memory

- Set "File NO.Reset" to be on.

card or format the current
memory.

Summary of Contents for DC-CAM 3000Z

































































Search results

Summary of Contents for DC-CAM 3000Z

Reviews:

Related manuals for DC-CAM 3000Z

Brands by name

Popular brands

Creative DC-CAM 3000Z, User Manual

Search results

Summary of Contents for DC-CAM 3000Z

Reviews:

Related manuals for DC-CAM 3000Z

Brands by name

Popular brands