8 About Your VIBRA™ 128 Card
3. On the Install/Uninstall tabbed page, select VIBRA 128.
4. Click the Add/Remove button, and then click the Yes button when prompted to remove the
software.
To Install VIBRA 128
in Windows NT 4.0/
Windows 2000
❑
To Install Audio Drivers and Software
❑
❑
If a Windows NT 4.0 Service Control Manager error message appears ...
To Install Audio Drivers
and Software
1. Insert the installation CD into your CD-ROM drive.
The installation screen appears.
2. Follow the instructions on the screen to complete the installation.
To Uninstall VIBRA 128
Windows NT 4.0
1. Click Start -> Settings -> Control Panel.
2. Double-click the Multimedia icon.
3. From the Audio Devices tabbed page, select any existing audio devices and then click
Remove. Click Yes when prompted to remove the driver.
4. Close the Multimedia Properties window and restart your computer.
Windows 2000
1. Click Start -> Settings -> Control Panel.
2. In the Control Panel window, double-click the Add/Remove Programs icon.
3. In the Add/Remove Programs dialog box, select the VIBRA 128 entry, and then click the
Change/Remove button.
4. After the uninstallation, click the Close button.
