About Your VIBRA™ 128 Card 9
If a Windows NT 4.0
Service Control
Manager error message
appears ...
If error messages appear at system restart, it is because you removed an audio card from your
computer after you have successfully installed the VIBRA 128 card. The drivers of the
removed audio card cannot locate the card.
To solve this problem:
1. Log on to your computer as Administrator.
2. Click Start -> Settings -> Control Panel.
3. Double-click the Multimedia icon, and then click the Devices tab.
4. In the list, under these entries
❑
Audio Devices
❑
MIDI Devices And Instruments
remove all items except
❑
Audio for VIBRA 128 / SB AUDIO PCI
❑
MIDI for VIBRA 128 / SB AUDIO PCI
5. Click the OK button to close the dialog box.
The drivers are removed.
