Frequently Asked Questions B-2
Why does a Digital Signature Notice error message appear on a
Windows XP or Windows 2000 operating system during installation?
At the time of this product’s release, a Microsoft Bluetooth certification program
was unavailable. As such, a message similar to the one below may appear when
you are installing this product's driver.
Click the
OK
button if you do not wish to continue seeing this notice throughout
the installation procedure. Creative has tested this driver on Windows XP and
Windows 2000, and it does not impair or destabilize your computer.
What do I do if I connected the modem to my computer before installing
the software?
Follow the instructions below if you connected your modem to your computer
before installing the software:
1. If the
Add New Hardware Wizard
or
Found New Hardware Wizard
dialog
box appears when your computer starts up, click the
Cancel
button.
2. Shut down your computer and disconnect the modem from your computer.
3. Follow the software installation instructions that apply to your operating
system in the "Installing Software" on page 3-1 for Bluetooth connection and
Summary of Contents for Blaster CB5722
