Setting Up a Bluetooth Connection 3-1
Setting Up a Bluetooth Connection
Noting Down
the Modem
BDA and Pin
Code
Before you install your Modem Blaster CB5722, take note of the Bluetooth device
address (BDA) and pin code found on a label on your modem and USB Adapter.
You need them later to verify your Bluetooth installation and pair your Bluetooth
devices.
Installing
Software
DO NOT
connect your modem or your USB Adapter to your computer until you
have installed the software.
1. Insert the Installation CD into your CD-ROM/DVD-ROM drive.
The disc supports Windows Autoplay mode and starts running automatically. If
not, you need to enable the Windows auto-insert notification feature for your
CD-ROM/DVD-ROM drive. For more information, see "What do I do when the
installation does not start automatically after the Installation CD is inserted?"
2. Follow the instructions on the screen to complete the installation.
Note:
Make sure that
Bluetooth Software
is selected during installation.
You may be asked, after an application is installed, if you want to restart your
computer. Select
No
until all the drivers and applications are installed.
For serial connection,
skip this section and go
to the next chapter.
If you have accidentally
connected your modem
to your computer
before installing the
software, see
"Frequently Asked
Questions" on page B-1
for troubleshooting
advice.
Summary of Contents for Blaster CB5722
