Setting Up a Serial Connection 4-1
Setting Up a Serial Connection
Installing
Software
DO NOT
connect your modem to your computer until you have installed the
software.
1. Insert the Installation CD into your CD-ROM/DVD-ROM drive.
The disc supports Windows Autoplay mode and starts running automatically. If
not, you need to enable the Windows auto-insert notification feature for your
CD-ROM/DVD-ROM drive. For more information, see "What do I do when the
installation does not start automatically after the Installation CD is inserted?"
2. Follow the instructions on the screen to complete the installation.
Note:
Make sure that
Modem Drivers
is selected during installation.
You may be asked, after an application is installed, if you want to restart your
computer. Click the
No
button.
3.
For Windows 2000 only:
If the
Digital Signature Not Found
window
appears, click the
Yes
button.
For Bluetooth
connection, refer to the
previous chapter.
If you have accidentally
connected your modem
to your computer
before installing the
software, see
"Frequently Asked
Questions" on page B-1
for troubleshooting
advice.
Figure 4-1
Summary of Contents for Blaster CB5722
