Setting Up a Bluetooth Connection 3-3
6. Click the
Finish
button, and then restart your computer if you are prompted
to do so.
7. After your computer restarts, see "Installing Hardware" in the next section for
instructions on connecting your modem to your computer.
Installing
Hardware
Set up your modem, connect its power adapter to the wall outlet and connect your
USB Adapter as shown below.
Windows automatically detects your USB Adapter and installs your device.
To configure your Modem Blaster CB5722 as a Bluetooth device, see "Configuring
Your Bluetooth Device" on page 3-4.
• To turn on your
modem, connect the
power adapter to
the wall outlet and
where necessary,
turn on the mains.
The
PWR
LED on
your modem lights
up.
• To turn off your
modem, disconnect
the power adapter
from the wall, or
turn off the mains.
Avoid using a USB
extension cable to
connect the USB
Adapter to your
computer, as this may
affect its functionality.
Telephone Line jack
Connect this to a
telephone line for data
and facsimile
transmissions.
Phone jack
Connect a phone set
to the Phone jack.
Creative USB Adapter with Bluetooth
Wireless Technology
USB
port
Power
adapter
Interface switch
Push this towards
the
BT
symbol.
Figure 3-3
Notebook or
desktop computer
Summary of Contents for Blaster CB5722
