3D Blaster GeForce2 GTS Installation Guide 5
5. Locate a free AGP expansion slot.
Figure 2 shows the various types of expansion slots.
6. Remove the metal plate from the free AGP slot.
Keep the screw and metal plate for future use.
7. Align the bus connector of the graphics card with the
expansion slot.
8. Press the card’s bus connector firmly and evenly into
the slot, making sure that the bus connector comes
into full contact with the slot. Then, secure the card
to the computer casing with a screw. See Figure 3
below.
Figure 2: Types of expansion slots.
An AGP slot
A PCI slot
An ISA slot
Figure 3: Securing the graphics card to the slot.
ii.Secure the card to the slot
with a screw.
i. Press the card into the slot. Ensure that
the bus connector has been pressed in as
far as it will go and is sitting firmly inside
the expansion slot.
Warning: However do not force the
graphics card into place. If it does not fit
properly, remove it and try again.
Summary of Contents for 3D Blaster
Page 1: ...User s Guide...