Tutorials
0202 USB 2.0 Owner’s Manual
23
2 - Basic Multitrack Recording
This tutorial assumes you’re using a single input or pair of inputs. For more
advanced recording, refer to the Sonar LE manual. Sonar opens by default with
with 2 audio tracks and 2 MIDI tracks.
1. Click the
Restore Strip Size
button for Track 1. This reveals
the input and output routing of
the track. The E-MU
0202
USB
2.0 will already be selected as the
output destination.
2. Select the input source by clicking on the small triangle on the input field. If
you wish to record a mono signal on the “A” input of the 0404 USB, select
Left
ASIO E-MU 0202|USB Analog In A
. To record both inputs in stereo select
Stereo ASIO E-MU 0202|USB Analog In A.
3. The Input Echo button
should be
OFF.
You will be monitoring the input
through the E-MU
0202
.
4. Press the
Direct Monitor
button on your E-MU
0202
USB 2.0. If you are
recording a mono track, set Direct Monitor to
Mono
by pressing the Direct
Monitor button again.
TIP . . .
If you don’t see meter
activity on the track, check
the Input for the track.
Make sure you are selecting
the proper input source.
5. Press the
Track Record Enable
button
for the track. (See the diagram on
the previous page.) The track turns a dull red color to indicate that it is record-
enabled. You should now see activity on the Track Input Meter when feeding a
signal into the 0202 USB 2.0.
The Sonar Project Window
Track Record Enable
Step 3
Inspector
Restore Strip Size
Input
Click
Here
Output
Summary of Contents for 202
Page 1: ...Owner s Manual Owner s Manual ...
Page 4: ...E MU Systems 4 ...
