Creative 16-Bit Sound Card User Manual Download Page 16

Page: 16 / 72

1-6

Edit Menu

The Edit menu contains the following editing commands:

Undo

Restores the wave file to the state last
saved.

Cut

Copies and then removes the selected
portion of the wave data.

Copy

Copies the selected portion of the data.

Paste

Pastes cut or copied wave data into the Edit
Window. If you have selected a portion of
the data, that portion is replaced.
Otherwise, WaveEditor pastes the data at
the cursor.

Paste Mix

Mixes cut or copied wave data with the one
in the Edit Window. When you play the
wave file, you will hear both sounds
together.

Delete

Deletes a selected portion of the data.
Unlike the Cut command, the data is not
copied first.

Crop To Selection

Deletes the entire data except the portion
selected.

Select All

Selects the entire wave file in the Edit
Window. You can also do this by double-
clicking the mouse anywhere within the Edit
Window.

View Menu

The following commands on the View menu allow you to customise
the WaveEditor workspace:

Toolbar

Toggles the Toolbar on or off.

Status Bar

Toggles the Status Bar on or off.

Fit Wave In Window

Scales (adjusts the zoom ratio) the wave
display to fit the size of the Edit Window.

Actual Size

Resets the zoom ratio of the wave display in
the Edit Window to its actual size (1:1).

Cursor Position

Displays the wave file at the starting
position of the wave selection.

Cursor End

Displays the wave file at the ending position
of the wave selection.

Summary of Contents for 16-Bit Sound Card









































































Search results

Summary of Contents for 16-Bit Sound Card

Reviews:

Related manuals for 16-Bit Sound Card

Brands by name

Popular brands

Creative 16-Bit Sound Card, User Manual

Search results

Summary of Contents for 16-Bit Sound Card

Reviews:

Related manuals for 16-Bit Sound Card

Brands by name

Popular brands