DFM-6301 Models
Program Output
20
Setting the Relay Operation (
r e l a y
)
This menu is used to set up the operation of the relays. This menu is only
available in PD6300-xx5-CS models.
Caution!
During setup, the relays do not follow the input and
they will remain in the state found prior to entering
the Relay menu.
1.
Relay assignment
a.
Rate for low and high alarm
b.
Total
c.
Grand total
d.
Modbus input
2.
Relay action
a.
Automatic reset only (non-latching)
b.
Aut manual reset at any time (non-latching)
c.
Latching (manual reset only)
d.
Latching with Clear (manual reset only after alarm condition has
cleared)
e.
Alternation control (automatic reset only)
f.
Sampling (the relay is activated for a user-specified time)
g.
Off (relay state controlled by Interlock feature)
3.
Set and reset points
4.
Fail-safe operation
a.
On (enabled)
b.
Off (disabled)
5.
Time delay
a.
On delay (0-999.9 seconds)
b.
Off delay (0-999.9 seconds)
!
