© Copyright 2018, Creative Playthings
MANCHESTER PREMIUM PACK 5
MANC9WPP5-100 Rev A (05-18)
Page 2
• Spiral mount step 9. Before installing the slide entrance,
install the walls slats omitted in step 23 of the fun deck as-
sembly. Make sure all gaps are less than 3-1/2" to prevent
a possible head entrapment.
• Complete installation of the Spiral Slide.
• Install the swing beam using instructions from 63076-303
and step 46 in the Manchester manual. For proper fit within
the play zone found in the Creative Playthings play zone
book, install the swing mount to the corner post by the rung
ladder.
• Install the Rocket Slide as shown in the step 31 of the fun
deck manual using the method shown in the Manchester
instructions.
• Install the Gable Fans (SM964-402).
• Install the Access Handles (AG942-400) on both sides of
the steps.
• Mount the Slide Handle (AG943-400) above the slide.
• Double-check all fasteners are secure and all recessed
hardware is covered by hole caps.
