BRIDGEHAMPTON PREMIUM PACK 2
BRID9WPP2-100 Rev A (12-19)
© Copyright 2018, Creative Playthings
the Lexington tower.
• Secure the Access Ladder (SH946-102) to the back of the
Williamsburg tower in the position shown above using the
method shown in step 17 of the Wmsburg instructions.
• Fasten two Access Ladder Handles (AG942-400) to each
Access Ladder.
• Assemble the Spiral Slide and secure it to the back of the
Skybox using the skybox mount (63033-102).
• Install the Bubble Panel (AP970-104).
• Install the Rocket Slide (15140-400) using the Skybox
Slide kit (50398-700).
• Mount a Slide Handle (AG943-400) above the Super Wave
Slide and Rocket Slide.
• Mount the Ice Cream Stand (63081-102) to the end of the
Skybox.
• Install the wall slats in the positions shown above and on
the first page, using the methods from the Williamsburg
Instructions. Gaps must be narrower than 3-1/2" or wider
than 9" to prevent potential head entrapment.
• Mount the hand grips to the entrance wall slats.
• Install the Shutters and Flower Box from the Clubhouse
Window Pack (63073-101) to the window panel below the
Bridge.
• Double-check all fasteners are secure and all recessed
hardware is covered by hole caps.
• Hang the swings.
