www.cls-led.com
ACX 60 DMX-controller
- 3 -
- 4 -
2 LOCkINg/UNLOCkINg PROgRAM-bUTTONS
It is possible to lock and unlock the program-buttons of the ACX60. When you start programming first unlock the
program-buttons.
• To lock the program-buttons of the ACX60 press [FCN] + [OFF] + [
É
] + [
Ñ
].
• To unlock the program-buttons of the ACX60 press [FCN] + [
É
] + [
Ñ
].
3. ChANNEL SETTINgS
With the channel-settings you can enable/disable the DMX-channels or set how much DMX-channels you have to
program. Factory-set (and maximum) is 60 DMX-channels.
3.1 Setting the dmx start address
You have to select a start address for the controller, here you can set on which channel the ACX60 should start sending
it's DMX data. For standard use this address should be set to 1.
• First push the [FCN] button to get in the main-menu.
• Scroll with the %-buttons ([
Å
][
Ç
]) to select [F8:START DMX] where you can set the address.
• You can change the address using the %-buttons ([
Å
][
Ç
]).
• To confirm and go back to the main-menu press [FCN].
3.2 Set maximum of DMX-channels
• First push the [FCN] button to get into the main-menu.
!
W
ARNING
Before programming, first power on the aCX60 for 8
hours. after this 8 hours, the BaCkup Battery is full,
and now you Can program the aCX60.
the maXimum length of the rJ11- rJ11 CaBle Between
splitter and aCX60 is 5 metres. if you use a longer CaBle,
the display of the aCX60 doesn't work!
• Scroll with the %-buttons ([
Å
] or [
Ç
]) to select [F3: MAXIMUM CH] where you can set a maximum of DMX-channels.
Enter this menu with the [FCN] button.
• Change the maximum of settings with the %- and CH-buttons ([
Å
] or [
Ç
] or [
É
] or [
Ñ
]). To save press the
function-button [FCN] and go back to the main-menu.
3.3 Disable DMX-channels
• To black-out (disable channels) press [OFF].
4. EDIT INTERNAL CLOCk
• First push the [FCN] button to get into the main-menu.
• Scroll with the %-buttons([
Å
] or [
Ç
]) to select [F5: MODIFY CLOCK] where you can edit the internal clock. Enter this
menu with the [FCN] button.
• Now select a date/time to edit. To do this, use the %-buttons ([
Å
] or [
Ç
]).
• Now edit the date/time with the %- or CH-buttons ([
Å
] or [
Ç
] or [
É
] or [
Ñ
]).
• If you are ready press the function-button [FCN] to save.
5. SCENES
Before you can program a chase you must program scenes. A scene is 1 step with information for all 60 DMX-channels.
[Example] Scene 1: DMX-Channel 1 value 50%
DMX-Channel 2 value 50%
Scene 2: Channel 30 value 24%
Channel 59 value 75%
All other DMX-channels value 0%
Scene 3: …
5.1 Programming Scenes
Every time you want to program, first push the function [FCN] button. You enter a menu where you can change all
settings.
• First push the [FCN] button to get into the main-menu.
