Smart Chain Hoist Reference Manual
Published 4-14-20
UNDER THE HOOD
Typically, you will not need to open your
Smart Chain Hoist
. However, you may need to adjust the
limits due to installation conditions, or you may need to access the terminal blocks for advanced
troubleshooting.
OPENING THE MACHINE
On each side of the hoist, there is a hood to protect the mechanics and electrical connections inside.
The limits are covered by the hood that has a label with the load rating of the machine and (4) SHCS.
These screws need to be loosened to take the limit enclosure hood off and access the inside of the
Smart Chain Hoist.
To open the
Smart Chain Hoist
, you will need a 3/16” Allen key. Be aware, each
hood has a gasket which must be reseated properly.
Page 5
