Smart Chain Hoist Reference Manual
Published 4-14-20
Inside the limit enclosure hood, you’ll find the
Smart Chain Hoist’s
rotatable limit switch and position
encoder, as well as its motor and load brakes.
The motor enclosure hood protects the motor, speed encoder, and most of its wiring. This hood is held
in place with (2) SHCS and has a label with the CM/Lodestar logo.
Like the limit enclosure, you will need to loosen the two screws with a 3/16” Allen Key. Once taken off,
you will see the motor and signal wiring, as well as the motor and speed encoder.
Page 6
