background image

BASIC PLAYBACK

11

Fast forward and Fast reverse 

1

. Press F.FWD        to fast forward through the disc.  

    Each time the F.FWD      button is pressed, the 
    fast forward motion speed changes. The speed will 
    increase through the following sequence: Fast x2,
    Fast x4, Fast x8, Fast x16, Fast x32, Fast x64, 
    Fastx128.

2

. Press PLAY to resume normal playback.

3

. Press F.REV         to fast reverse through the disc.

    Each  time  the  F.REV       button is pressed,  the 
    fast reverse motion speed changes. The speed will 
    increase through the following sequence: Fast x2,
    Fast x4, Fast x8, Fast x16, Fast x32, Fast x64, 
    Fast x128.

4

. Press PLAY to resume normal playback.

    

1.

 Press STOP      button to go to stop mode, the TV

    screen  will show the start logo.  As some disc the
    player can recall the location where stopped, such
    as BD.

2.

 Press  PLAY  to playback to resume playback from 

    the location where playback is stopped or from the 
    beginning of the disc.

3.

 Press STOP twice to stop completely.

Note: Not all Blu-ray Discs support the resume feature.
The resume information is saved even when the power
is turned off.

Stop playback

Pause playback

1.

 Press PAUSE     to pause playback . The sound 

    will be muted .

2.

 Press PAUSE     or PLAY to resume normal playback.

    

Basic playback

1

. Press STANDBY/ON switch on the front panel or 

the remote, your player turns on.
2. Turn on the TV, then select the input setting on the 
TV that matches the connection method you used to 
connect your player.
3. Press OPEN/CLOSE      to open the disc tray.
4. Place a disc on the disc tray with the label facing 
up, then press OPEN/CLOSE       to close the disc 
tray. It may take a few seconds for the disc to load.
5. If the disc does not start playing automatically, 
press PLAY .
6. If a Blu-ray Disc or DVD menu opens, press 
CURSOR button to select PLAY, then press ENTER.
7. To eject the disc, press OPEN/CLOSE     . 

NOTES:

The device will enter screen saver status (Black 
screen) automatically after five minutes under below 
situations:
1. Eject or No Disc;
2. "Pause" or "Stop" during MP3/CD/WMA/DVD/
JPEG/BD/DIVX/MPEG4 playback;
Pressing any key on remote control or unit panel will 
deactivate the black screen saver immediately.

 

Single step playback

1.

 Press STEP       continuous to single step forward

    to the next frame in the video. 

2.

 Press PLAY to resume normal playback.

    

NOTES:

1. 

   Previous and Next

Within playing five seconds, press PREV       key can 
back to the previous of  the chapter.  After playing five
seconds, press PREV       key can back to the start 
of the chapter.
Each press of NEXT        

 during playing will skip 

the current chapter and play the next one.

key

Summary of Contents for BD16

































Reviews: