Create WIND ROUND, User Manual

Page: 7 / 64

7 ENGLISH
SAFETY INSTRUCTIONS
INSTALLATION INSTRUCTIONS
• When using any electrical appliance, basic safety precautions should always be observed.
• Read this entire manual carefully before beginning installation. Save these instructions.
• Use only original spare parts.
• To reduce the risk of personal injury, connect the fan directly to the building support struc-
ture in accordance with these instructions and use only the supplied hardware.
• To avoid possible electrical shock, before installing your fan, disconnect power by turning
off the circuit breakers in the outlet box and the associated wall switch location. If you
cannot lock the circuit breakers in the off position, securely attach a prominent warning
device, such as a tag, to the service panel.
• All wiring must be in accordance with national and local electrical codes and ANSI / NFPA
70. If you are unfamiliar with wiring, contact a qualified electrician.
• To reduce the risk of personal injury, do not bend the blade clamping system when install-
ing, balancing, or cleaning the fan.
• Never insert foreign objects between the rotating fan blades.
• To reduce the risk of fire, electric shock, or motor damage, do not use a solid state speed
control with this fan. Use only original speed controls.
• This appliance can be used by children from 8 years of age and by people with reduced
physical, sensory or mental capacities or lack of experience and knowledge if they have
received supervision or instructions on how to use the appliance safely and understand the
dangers involved. Children must not play with the appliance. Children should not perform
cleaning or maintenance unless they are over 8 years old and supervised. Close supervision
is necessary when any appliance is used by or near children.
NOTE : The important safety precautions and instructions in the manual are not intended
to cover all possible conditions and situations that may occur. It should be understood that
common sense and caution are necessary factors in the installation and operation of this
fan.
Mark the correct position of the holes and fix the ceiling bracket using the screws with metal
plugs or screws and washers suitable for the type of ceiling chosen.
Check the correct installation of the bracket before hanging the fan. This plate must support
the full weight of the fan.
• To avoid personal injury and damage,
make sure the place to hang the sheets
leaves a clearance of 2.3 m from the
ground and 76 cm from any walls or
obstructions.
• Make sure the mounting bracket is
securely attached to the building
structure and can support the full
weight of the fan.
INSTALLATION PREPARATION
76 cm
from wall
or nearest
obstruction.
2.3 m from
the blades
to the
ground.