Create MINI SLOW JUICER, User Manual

Page: 10 / 56

10 ENGLISH
WARNING: There must be special vigilance against possible risks of personal danger, serious injury and
significant loss of property.
1. Putting hands, spoons or other hard objects into the feeding cup is prohibited so as not to cause injury,
accident or damage to the machine.
2. It is forbidden to disassemble the housing of the device to avoid damage to the motor or any other
danger.
3. It is forbidden to disassemble, hit or pierce the device. It is forbidden to put the device in water, fire or
under an environment whose temperature is higher than 60 ° C to avoid a fire.
4. This device can only be used in conjunction with parts and components such as the main body and
components provided by our company. Please do not rebuild it by yourself or use alternative parts so as
not to affect work performance or cause any accident.
5. Do not put this device in a dishwasher, microwave oven, any system or hot water above 60 ° C so as not
to damage the parts or affect its use.
6. In the squeezing process, remove the shells and cores from the ingredients as much as possible and
cut them into appropriate pieces. Slowly put them into the feeding cup one by one, and do not take too
much force. If the ingredients cannot be extruded smoothly, turn the switch to the stop level, pause for
1-2 seconds, then turn it to "REV" to reverse for 2-3 seconds, and turn the switch to "STA" after 1 -2
seconds. Then the device can work normally.
7. In the middle of the juicing process, if you find it difficult to dismantle the juicer components, turn the
switch to "REV" to reverse it for 1-2 seconds, and it will be easier to dismantle the device.
PRECAUTIONS
1. After use, the main body should be wiped with a dry cloth, and any remaining juices should be wiped
with a soft cloth and water. If there is serious dirt, use the cloth with neutral detergents to wipe them
gently, and then wipe them with the cloth moistened with water. When washing the filter, remove the
silicone ring from the filter and rinse it with clean water. In addition to using a cleaning brush, clean
up the residue. Afterwards, reassemble the filter silicone ring in the original position in time for the
next use.
2. It is forbidden to use volatile oils and detergents for cleaning, which may cause discoloration or
deformation of the device.
3. If the device remains inactive for a long time, keep it clean and dry, and store it in a well-ventilated and
dry place.
CLEANING AND MAINTENANCE