Page 2 — 546Wd_547Wd_548Wd_550Wd — Rev. 10/09
SPECIAL INSTRUCTIONS
If a top or leaf panel is cupped, do not be alarmed.
The top was flat when it was manufactured. It is a natural
characteristic of wood in an unfinished state to cup from uneven
moisture conditions. The figure at the right shows an exaggerated
view of what could happen. This only means that the
convex side
has absorbed moisture,
or
the concave side has dried out.
Usually a cupped panel will equalize and straighten out if both sides
are exposed to similar conditions for a day or so.
546Wd, 547Wd, 548Wd & 550Wd
Extension Table Top — Parts List
TOOLS REQUIRED:
Phillips Screwdriver, Wood Glue
PART
ITEM
DESCRIPTION
QUANTITY
546Wd
547Wd
548Wd
550Wd
Ac
. . . . Table Top / Leaf Set
. . . . . . . . . . . . . . . . . . 1 / 2 . . . . . 1 / 2 . . . . . 1 / 2 . . . . . . 1 / 2
Dc
. . . End Apron
(attached)
. . . . . . . . . . . . . . . . . 2 . . . . . . . 2 . . . . . . . 2 . . . . . . . . 2
Ec
. . . Left Front/Back Apron
(attached)
. . . . . . . . 2 . . . . . . . 2 . . . . . . . 2 . . . . . . . . 2
Gc
. . . Right Front/Back Apron
(attached)
. . . . . . . 2 . . . . . . . 2 . . . . . . . 2 . . . . . . . . 2
Fc
. . . . Leaf Apron . . . . . . . . . . . . . . . . . . . . . . . . . 4 . . . . . . . 4 . . . . . . . 4 . . . . . . . . 4
H
. . . . #8 x 1¼" Pan Head Screw
(some inserted)
30 . . . . . . . 32 . . . . . . . 32 . . . . . . . 30
I . . . . . Brass Angle Brace . . . . . . . . . . . . . . . . . . . 4 . . . . . . . 4 . . . . . . . 4 . . . . . . . . 4
J
. . . . #10 x ¾" Brass Oval Head Screw . . . . . . 8 . . . . . . . 8 . . . . . . . 8 . . . . . . . . 8
K
. . . . Lever Lock . . . . . . . . . . . . . . . . . . . . . . . . . 6 . . . . . . . 6 . . . . . . . 6 . . . . . . . . 6
Ld . . . . #8 x 5/8" Flat Head Screw . . . . . . . . . . . . 24 . . . . . . . 24 . . . . . . . 24 . . . . . . . 24
(for Lever Lock and Leveler Plate)
M . . . . Leveler Plate . . . . . . . . . . . . . . . . . . . . . . . . 6 . . . . . . . 6 . . . . . . . 6 . . . . . . . . 6
N
. . . . Guide Pin . . . . . . . . . . . . . . . . . . . . . . . . . . 9 . . . . . . . 12 . . . . . . . 9 . . . . . . . . 9
O
. . . . Table Slides
(attached)
. . . . . . . . . . . . . . . 2 . . . . . . . 2 . . . . . . . 2 . . . . . . . . 2
P
. . . . #12 x 1¾" Pan Head Screw
(inserted)
. . . . 12 . . . . . . . 12 . . . . . . . 12 . . . . . . . 16
Q
. . . . Leg Bracket
(attached)
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
4 . . . . . . . 4 . . . . . . . 4 . . . . . . . . 4
Rd . . . . #8 x 5/8" Flat Head Screw
(inserted)
. . . . . 16 . . . . . . . 16 . . . . . . . 16 . . . . . . . 16
S
. . . . Apron Cap
(attached)
6 . . . . . . . . . . . . . .
. . . . . . .
T
. . . . 90 Deg. Bracket
(attached)
. . . . . . . . . . . . 6 . . . . . . . . . . . . . .
. . . . . . .
U
. . . . #6 x 5/16" Flat Head Screw
(inserted)
. . . . 12 . . . . . . . . . . . . . .
. . . . . . .
V
. . . . #6 x ¾" Brass Flat Head Screw (inserted)
12
6
6
12
12
6
6
12
12
6
6
12
12
. . . . . . . . . . . . . .
. . . . . . .
Please identify the parts and check that quantities received match those on this list.
If you need to replace a part, refer to the following letter and model name.
