Base
(underneath)
x6
Cams
2
Turn over your Base panel. With bottom side up, insert cams
by hand, as indicated below. Do not attempt to tighten.
3
Connect Side 1 and Side 2 with the Base, one at a time by
lining up the posts and dowels with the corresponding holes
and tapping firmly into place.
Side 2
Base
Side 1
Once connected, use your screw driver to gently turn
cam 220 degrees clockwise to lock into position.
Check that you are installing
the sides panels correctly by
ensuring that there is a smaller
gap between the peg holes
and the bottom edge than the
peg holes and the top edge.
Summary of Contents for Cubby
Page 13: ......