Creality LD-006, User Manual

Page: 14 / 24

Caution ：Resin may cause skin irritation or an allergic
skin reaction. Please wear gloves before use to avoid
direct contact with the skin.
警示：请戴上手套方可进行装料，光敏树脂为刺激性材料,避
免接触到皮肤。
5
Load Resin
装料
Pour the UV photosensitive resin into the resin vat. The slot capacity is 500ml/1000ml.
将3D打印机 UV 光敏树脂倒入料盘，槽位容量分别：500ml/1000ml。
How to change resin:
提示：如何更换耗材？
将料盘缓缓取出，把剩余树脂倒入容器，清洗干净料盘，重新倒入新树脂，再把料盘安装到机器即可。
Tips：
Take out the resin vat slowly, pour out the remaining resin into the container, clean the resin
vat, pour in new resin, and then install the resin vat to the machine.
12
Please pay attention to the orientation marks and keep the printing
platform assembled in the right direction.
Otherwise it may lead to leveling faliure!
请按照标识正确安装固定成型平台，
装反会影响调平效果！
1000ml
500ml