10.7 Multi-Function Modulation Generator:
The Multi-Function Tool is a digital voltage generator with four modes controls the
[Multi-
Tool Out Jack]
. MIDI CC, triangle LFO, clock sync’d random voltage, or decay envelope.
Press
[
Green Edit Mode
: Note Button A#]
. to cycle between modes. Press once to check
current mode. Press again to advance through the available options.
•
MIDI CC output 4-bit display:
•
Triangle LFO 4-bit display:
•
Random voltage 4-bit display:
•
Decay envelope 4-bit display:
MIDI CC Output:
Outputs 0-5 volts based on the selected MIDI CC or modulation wheel. To set the active
MIDI CC number, press and hold the
[Edit (green) Button]
. While the
[Edit (green) Button]
is
pressed, the MIDI section assigns the active MIDI CC number based on the last incoming
MIDI CC message it receives. Simply move a mod wheel or engage an input source on a
MIDI controller to assign that MIDI CC number to the
[Multi-Tool Out Jack]
.
Clock Sync’d LFO:
A 0-5 volt triangle wave LFO sync’d to the active clock source. Rate is based on a division
or multiplication of the active clock source. Press
[
Blue Edit Mode
: Note Button A#]
to cycle
through clock divisions.
Divide Clock by 1 4-bit display:
Multiply Clock by 2 4-bit display:
Multiply Clock by 3 4-bit display:
Multiply Clock by 4 4-bit display:
Divide Clock by 8 4-bit display:
Divide Clock by 7 4-bit display:
Divide Clock by 6 4-bit display:
Divide Clock by 5 4-bit display:
Divide Clock by 4 4-bit display:
Divide Clock by 3 4-bit display:
Divide Clock by 2 4-bit display:
Random Voltage:
An unquantized 0-5 volt random voltage. Voltage changes are based on a division or
multiplication of the active clock source. Press
[
Blue Edit Mode
: Note Button A#]
to cycle
through clock divisions.
Divide Clock by 1 4-bit display:
Multiply Clock by 2 4-bit display:
Multiply Clock by 3 4-bit display:
Multiply Clock by 4 4-bit display:
Divide Clock by 4 4-bit display:
Divide Clock by 3 4-bit display:
Divide Clock by 2 4-bit display:
10 Controller
(continued)
East Beast