10.6 Sequencer and Arpeggiator
(continued)
:
Sequencer Mode Note Input:
Notes are added to a pattern by pressing a note button, receiving an external MIDI note,
or a combination of the two. The note pattern will begin looping as soon as the first note is
entered. A rest note can be added to the note pattern with
[
Green Edit Mode
: Note
Button B]
. Clear a note pattern using
[
Green Edit Mode
: Note Button C2]
.
Arpeggiator Mode Note Input:
Notes are added to a pattern in the order they are played by pressing and holding a series
of note buttons or external MIDI notes. The note pattern will begin looping as soon as the
first note is entered. The pattern will continue to loop and additional notes can be added
to the pattern until a note button is unpressed or external MIDI note off message is
received. Once a note button is unpressed or external MIDI note off message is received
the pattern will immediately be cleared unless hold mode is active.
Switching to arpeggiator mode enables hold mode by default. Hold mode can be
enabled / disabled using
[
Green Edit Mode
: Note Button D].
If hold mode is active, when a
note button is unpressed or external MIDI note off message is received the pattern will
continue to loop until a new note button is pressed or external MIDI note on message is
received. Once a new note button is pressed or external MIDI note on message is received
the current pattern is immediately cleared and a new pattern is started using the new
note button or external MIDI note. While hold mode is active, a note pattern can be
cleared by disabling hold mode or using the note pattern clear function with
[
Green Edit
Mode
: Note Button C2]
.
Save / Load:
East Beast can save up to 13 note patterns. Patterns can be saved and loaded while
sequencer / arpeggiator mode is active.
Load a Pattern:
Press and hold
[
Green Edit Mode
: Octave Down Button]
and then press a
[Note Button C1-
C2]
. The selected sequence will begin after the last step of the active sequence.
Save a Pattern:
Press and hold
[
Green Edit Mode
: Octave Down Up]
and then press a [
Note Button C1-C2]
.
The active sequence will be saved in this location.
10 Controller
(continued)
East Beast