© 2022 Craycle Hobby. Copies allowed for personal use only. Not for commercial use.
Assembly
www.craycle.com
Insert the “shaft” into the “rim” and assemble the “ring” onto
the “rim” part. Shaft model should be printed with PetG
material with 90% flow in slicer settings. This way it works very
well onto the 2mm steel wire. PetG is stronger material so we
use this shaft as PetG to get more lifetime and stifness. (You
can make a clear hole in the “wheel35_rim” by drilling it with 2
mm drill bit.)
STEP 4
Prepare Craycle
Landing Gear by using
2mm steel wire. You
can use this page as a
template by printing
100% real scale or you
can also use the
dimensions below as
well.
Dimensions are in mm.
4
