© 2022 Craycle Hobby. Copies allowed for personal use only. Not for commercial use.
Print Guide
www.craycle.com
The settings you should set according to your printer:
- Material Settings.
Printing Temperature
Buildplate Temperature
Flow (wall flow is important!)
- Travel Settings.
Retraction distance
Retraction speed
These settings might need adjustments according to your
printer or filament. You should print a wing part to test your
print quality. If your test print resulted in a succesful way then
you are ready to start the printing process for the rest of the
parts.
Note: 0,2 mm layer height is the best setting for the
Print Quality/Printing Time.
5
