© 2021 Craycle Hobby. Copies allowed for personal use only. Not for commercial use.
Epilogue
www.craycle.com
Center of Gravity is 29,5 mm behind from the leading edge
(There is a marked point under the wing).
You can add extra weights into the “fs1” to make CG correct.
You can also print FS3 and all tail parts with LW-PLA to make
the rear lighter. You can also print this model completely LW
but it’s not necessary at all. We are developing all of our
models by using Regular PLA to provide accessibility.
We recommend 6” propellers for this model but if you want to
make a trainer model, the bigger propellers will make the
model slower in the air. So you can use 7” propellers to make a
park flyer.
12
