© 2021 Craycle Hobby. Copies allowed for personal use only. Not for commercial use.
Assembly
www.craycle.com
STEP 9
Install your servos to the fuselage and prepare 2 pieces of 1,2
mm pushrods which is approximately 210 mm length.
You can make Z bend for the both side or use rod linkage to
make detachtable and facilate to set the flap positions.
For this model, the best way to mount the push rods is; Z-bend
is mounted on the outside, the push rod connectors are
mounted on the servo arms inside. In this way, connectors are
installed quick, it becomes possible to deassemble the wires,
and the objects that will create drag are reduced on the
outside.
You can use cheap 9 gram servos for this model becouse of it's
not required high sensitive on the control surfaces.
9
