-
Page 15 -
Functions - LEVELLER menu
SW1
Save?
L28
The output functionality for K14, X25:5 – 6 (default U02).
U00 = Indication Open door.
U01 = Indication Closed door.
U02 = Electrical door lock output (default).
U03 = Flashing light.
U04 = Leveller in resting position S6.
U05 = Truck in position S15.
U06 = French light.
U07 = Error indication. (except E08).
U08 = Steady light.
U09 = Not open door.
U10 = Not closed door.
+1 Yes
L29
Vehicle detection
U00 = Indication S02 (default).
U01 = S02 active is required to start shelter and open door.
U02 = S02 active is required to start shelter.
U03 = S02 active is required to open door.
L99
Factory pre-setting for leveller.
Change to U01 and save. The functions are now as pre-set from
factory.
+1 Yes
Table 2
Functions - SHELTER menu
SW1
Save?
S01
Show the total number of shelter cycles (x1).
Refresh
No
S02
Shelter type (default SIR).
U00 = SIR.
U01 = SIB / SIE.
+1 Yes
Table 3
950 Docking -
Start Here!
2:1
Normal Service Technician work procedure
1.
For 950 Docking control box: Service lamp is ON.
2.
Remove the screws and open the control box.
3.
Attach the Service Tool cable on the connector X2 (950 Docking) on the leveller board
in the control box.
4.
The display shall now show the same information as the display on the outside of the
control box.
5.
Follow the instructions in §2.2.1 and choose submenu L03 in menu [L] which is the
total number of leveller cycles counter. Look in the service manual to see which service
the leveller needs according to how many cycles it has been ran.
