HCD139
（
B022
）
redialing at on-hook state, the pause time between PABX exit code and phone number is about 1
second.
LED INDICATOR&BACK-LIGHT
When any new incoming call is missing, the LED indicator flashes .Checking the new call or
operating the telephone will make the LED turned off. The back-light will be turned on when
receiving an incoming call or dialing, and switched off 6 seconds later after operating finished.
ONE-TOUCH MEMORY
Store:
on-hook + SET + Mi (i=1,2,3 )
When checking the incoming call /outgoing call/pre-dialing call, press
SET
and you will see on
LCD: STORE IN. Press Mi (I=1,2,3 ) to store.
Dialing: on-hook + Mi (I=1,2,3 )
Press
Mi (i=1,2,3 ) and pick up the handset or press
HF
key to dial from the line which you
choose.
TWO-TOUCH MEMORY
Store: SET + N (N=0 – 9, *, # )
Press
RECALL
and N (N= 0 – 9, *, # ) and pick up the handset or press
HF
key to dial from the
line which you choose.
DISPLAY OF TWO LINES IN DIFFERENT STATE
When line1 is at off-hook state, the incoming call from line2 will be displayed on LCD while the
back light is turned on. The ring indicator of line 2 will flash and the ring is shorter in order not to
influence the talking of line 1.
5
