8
Storing Your Own Presets:
Each channel of the VTX350H has two factory assigned Effects presets, as shown on
pages 10 and 11. No matter what the settings of the Reverb, Delay and Effects controls,
the DSP and reverb presets are recalled when a channel is selected. You may change
the DSP and reverb settings by rotating the Reverb, Delay and Effects controls - these
changes will remain active until a different channel is selected, but will not be there for
later use unless they are saved. To save a new preset to a channel, first make the
desired changes. Then press and hold the Tap/Save button for about three seconds. The
Tap/Save LED will flash through three quick sequences, indicating the preset was saved.
The new preset is stored for that channel and will remain in memory until a new preset is
stored for that channel or the factory presets are restored.
(We recommend making copies of page 14 of this guide for the purpose of writing down your own presets.)
Restoring the Factory Presets:
The factory assigned presets may be restored, erasing any changes you have made.
Turn the amplifier off. Press and hold the Tap/Save button as you turn the amplifier on.
The Tap/Save LED will flash through two quick sequences, indicating the factory presets
have been restored.
More About the Tap/Save Button:
The Tap/Save button is used to set the tempo of an effect simply by tapping on it in
time to the desired tempo – the time between the two taps sets the timing of the effect.
(If the tempo entered is greater than one tap per second, the tempo will default to one
second, which is the maximum tap-tempo time period.)
The Delay and the Effects may each have a different tap speed. The default “target”
for the Tap/Save button is the Delay control. To select the Effects control as the tap but-
ton’s target, rotate the Effects control. The Tap/Save tempo function will automatically
revert back to the Delay control 16 seconds after the Effects control is rotated, or when
the tap speed was last changed for the effect. (If the Delay control is set to Bypass, the
Tap/Save function will not revert to Delay.)
NOTE: In most cases, it is usually more pleasing to the ear to set a slower tap speed for the high level
effects and a faster tap speed for the low level effects - see page 7.
3 SECONDS
CHANGES ARE
SAVED AS
NEW PRESET
VTX350H
Three-Channel Guitar Amplifier with Advanced DSP
