Crate TXB50, Driver Manual, Page: 12 / 12

©2002 SLM Electronics • A division of St. Louis Music
1400 Ferguson Avenue • St. Louis, MO 63133
P/N 47-488-01 • 03/02
TECHNICAL SPECIFICATIONS
OUTPUT POWER RATING 50W RMS @ 10% THD, 4 ohms, 13.6VDC in
INPUT IMPEDANCE 220k ohm
MAXIMUM SIGNAL ACCEPTED 12V peak to peak
GAIN Input 52dB
CD Input 23dB
Insert 37dB
SENSITIVITY Input 25mV RMS
Line In Insert 150mV RMS
EQS Low 19dB range @ 60Hz
Low Mid 25dB range @ 200Hz
High Mid 16dB range @ 1kHz
High 28dB range @ 10kHz
INSERT JACK Tip Line In
Ring Line Out
Sleeve Ground
SPEAKER Crate Custom Design 10”, 4 ohm, 50 watt
1.0” voice coil, 30 oz magnet
POWER REQUIREMENTS Internal 12 volt DC power supply, 18VA
SIZE AND WEIGHT 18-1/2”W x 13-1/2”H x 12-1/2”D; 22 lbs.
The TXB50 is enclosed in a rugged, molded high tech polymer cabinet.
Wipe the enclosure with a damp, lint-free cloth to remove dirt and road
film. Never spray cleaning agents directly onto the enclosure. Do not
use abrasive cleansers which will damage the finish.
Crate continually develops new products, as well as improves existing ones. For this reason,
the specifications and information in this manual are subject to change without notice.
www.crateamps.com