Crate TXB50, Driver Manual, Page: 10 / 12

10
SUGGESTED SET-UPS (CONTINUED):
Idea 3 - Music Playback: Connect the outputs of a CD player or tape deck
to the Input jack. (Use a dual RCA-to-mono 1/4” adapter as shown below.)
Use the gain, eq and level controls to adjust the sound as desired.
Notes:
• When a tape player or CD player is connected to the CD Input jacks,
the output of the player may need to be adjusted by means of its out-
put level control (if it has one), or by an external attenuator/preamp.
• A tape player or CD player may be connected to the Input channel
instead of the CD Input jacks. This provides control of the gain and
equalization of the signal, as well as the application of the DSP if
desired. In this case, the left and right ouputs of the tape or CD play-
er must be summed as shown below to create a mono signal.
CD PLAYER
EQ, COMP/LMTR
INPUT
INSERT
LEFT
OUT
TO INPUT JACK
CA9Y
DUAL RCA-TO-MONO
1/4" ADAPTER
RIGHT
OUT