©2001 SLM Electronics • A division of St. Louis Music
1400 Ferguson Avenue • St. Louis, MO 63133
P/N 47-099-02 • 08/01
C R A T E
TECHNICAL SPECIFICATIONS
OUTPUT POWER RATING
50W RMS @ 10% THD, 4 ohms, 13.6VDC in
INPUT IMPEDANCE
1M ohm
MAXIMUM SIGNAL ACCEPTED
Mic Low Z
2V peak to peak
Mic Hi Z
12V peak to peak
Instrument
12V peak to peak
GAIN
Mic
57dB High Z, 72dB Low Z
Instrument
44dB w/Gain switch out, Ch2
85dB w/Gain switch in, Ch1
SENSITIVITY
Mic
3.5mV RMS High Z, 20mV RMS Low Z
Instrument
80mV RMS w/Gain switch out, Ch2
.8mV RMS w/Gain switch in, Ch1
Line In Insert
400mV RMS
EQS, MIC
Low
±15dB @ 60Hz
Mid
±15dB @ 600Hz
High
±15dB @ 10kHz
EQS, INSTRUMENT
Low
12.5dB range @ 80Hz
Mid
18dB range @ 800Hz
High
18dB range @ 10kHz
Shape
Crate proprietary circuit
INSERT JACK
Tip
Line In
Ring
Line Out
Sleeve
Ground
SPEAKERS
Woofer
Crate Custom Design 10”, 4 ohm, 100 watt
1.5” voice coil, 16 oz magnet
Tweeter
2” Piezo , 4 ohm, 150 watt network
POWER REQUIREMENTS
Internal 12 volt DC power supply
DC adapter for use with 120VAC
Optional 12V vehicle lighter adapter
SIZE AND WEIGHT
18-1/2”W x 13-1/2”H x 12-1/2”D; 22 lbs.
The TX50DE is
enclosed in a rugged, molded high tech polymer cabinet. Wipe
the enclosure with a damp, lint-free cloth to remove dirt and road film. Never
spray cleaning agents directly onto the enclosure, and stay away from abra-
sive cleansers which could damage the finish.
Crate continually develops new products, as well as improves existing ones. For this reason,
the specifications and information in this manual are subject to change without notice.
www.crateamps.com
