8
MOVEABLE ASSEMBLY
For “C” Channel Basin Package
PARTS LIST For 2HP SGV Grinder 107359*
ITEM QTY. PART No.
DESCRIPTION
ITEM QTY. PART No.
DESCRIPTION
1
1
107471 Lower Pump Bracket
8
1
074535 Moveable Fitting
2
1
075589 Pipe, 1.25 NPT x 14” Lg
9
A/R
----
Loctite PST #567
3
1
110808
U-Bolt and Nuts
10
A/R
----
Loctite #242
4
1
074758 Upper Pump Bracket
11
1
107356 U-Bolt
5
1
077881 Ball Check Valve
12
2
062941 Flat Washer
6
2
075476 Close Elbow, 1.25 NPT
13
2
026322 Lockwasher
7
1
075481 Elbow
14
2
15-19-1 Hex Nut
(*) Pump
NOT
included under this part number. The Moveable Assembly will be factory assembled to pump when a Basin Package
Sytem is ordered.
SUSPENDED PUMP SYSTEMS
Remove four hex nuts and lockwashers from volute. Then remove
volute and rotate 90º clockwise. See Figure, so that the discharge is 90º
from handle on motor housing. Replace hex nuts and lockwashers and
tighten. Place Suspended Bracket (Item 3) on motor housing and insert
two cap screws (item 1) and two lockwashers (item 2) and tighten.
Attach the pump cover to the top of the bracket. Then connect the
discharge pipe (by others) to the pump. Mount the float switches to
the discharge pipe and pull the pump cord sets and float switch cords
through the cord grips attached to the pump cover. The pump with cover
can now be lowered into basin.
PARTS LIST
ITEM
QTY
PART No.
DESCRIPTION
1
2
1-32-1
Hex Hed Capscrew
2
2
20-14-1
Lockwasher
3
1
071753
071754
071755
071756
071757
Suspended Bracket
36” Basin Depth
48” Basin Depth
60” Basin Depth
72” Basin Depth
84” Basin Depth
inches
(mm)