Electronic Scoreboard Instructions
8
9. Press SELECT/ENTER.
10. The game begins after a 5 second countdown.
11. When a light appears on a target, hit that target to score points.
12. At the end of the game, the LCD will display the result. Scores will be shown
separately for HIT, MISS and PERCENTAGE.
13. After the game is over, press SELECT/ENTER to restart the game
(step 10).
14. In the “Speedbag” and “KO” game modes, after the game is over for Player 1
there will be a 5 second countdown before the game commences for Player 2.
15. Pressing the RESET key for 1 second at any point will return to the game select
mode (step 2).
NOTES:
1. Pressing the ON/OFF key at any point for one second will turn the game off.
2. After a 5 minute period of inactivity, the game will automatically power off.
Pressing the ON/OFF key will return the game to the previous position.
3. To adjust the volume, press the VOLUME SOUND ON/OFF key and the UP or
DOWN keys to reach the desired volume level. The volume levels range from 0
to 5, where 0 is mute and 5 is the maximum.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and
receiver.
-- Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV
technician for help.
WARNING: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
