Crane NRI Currenza C2, Technical Documentation Manual

Page: 31 / 83

31
National Rejectors, Inc. GmbH, Buxtehude
c
2
Configuration c
ash accepTance
Limiting acceptance of coins and banknotes
(only c
2
BDV/Executive)
In order to prevent the vending machine from being used as a money
changer, you can set a maximum amount of money which may be accepted
during a single vending operation (acceptance limitation). If this amount is
reached or exceeded, the acceptance of coins and bills is inhibited .
In addition, you may set the coin changer so that the change is returned
only after a transaction and automatically (see section "Configuring
"Committed to vend" or change return at any time" in Chap. 5 "Prices
and vending modes").
To configure the acceptance limitation:
Quick approach:
= Main menu > E = Settings > Operating modes > Limitations > Acceptance limit
Press key ... How often? effect
1
1 x You enter the main menu
2
1 x
You enter the s
eTTinG
menu. The
required menu item has already been
selected
3
1 x You enter submenu o
peraTinG moDes
4
until Limitations You want to enter submenu l
imiTaTions
5
1 x
You enter the submenu . The required
menu item has already been selected
6
1 x
You want to set the acceptance
limitation
7
/
until required digit You highlight the digit to be set
8
/
until required value This value is to be set
9
Please repeat steps 7 and 8 to set the other digits of the acceptance limitation, if necessary
10
1 x
You lock the set acceptance limitation
in memory
11
1 x/2 x
You return to main menu/operating
mode