9
HUMIDIFIER ASSEMBLY & OPERATION
ASSEMBLY
ALWAYS use fresh cool water when operating the humidifier and carry the water tank
with two hands.
1.
Open the back panel by pressing the tab and pulling outwards. Remove the Water
Tank, turn over and unscrew the Water Tank Cap with attached Filter. The filter is
optional and can be removed/used without by unscrewing from the cap.
2.
Fill Water Tank with cool water only. DO NOT fill all the way to the rim. DO NOT add
any medication, essential oils or salt to the tank.
3.
Screw the Water Tank Cap back on the Water Tank and replace inside the unit,
making sure the tank fits securely. Replace the back panel before use.
Notes:
1.
Do not attempt to move the humidifier/heater while Water Tank is filled inside the
unit. Doing so may cause leakage of water and/or the Base to overfill.
2.
The heater & humidifier may be operated at the same time or separately.
3.
The Water Tank must be installed and full of water in order to turn on the humidifier in
order to avoid damage to the unit.
OPERATION
1.
The on/off switch is located on the bottom right side of the
unit. The power indicator will turn green when the humidifier is
on. Turn the knob up to turn on and increase the mist. Turn the
knob down to decrease mist or turn the humidifier off.
2.
When the unit runs out of water, the mist and fan stop working
and the power indicator light turns red.
Summary of Contents for EE-8084
Page 13: ...13 ...