Crane EE-8084, Manual, Page: 8 / 13

8
HEATER OPERATION & USE
CONTROL PANEL
POWER BUTTON
Press the power icon to turn on the heater.
Press it again to turn off the heater.
POWER LEVEL
Press to change the power level back and forth between High and
Low heat.
OSCILLATION
Press to turn the oscillation feature on or off.
TIMER SETTING
Press gear button once, then use the + and – buttons to set the timer
from 1-12 hours. Press gear button 1 more time to access the
temperature settings, or twice to confirm the timer setting.
TEMPERATURE SETTING
Press gear button twice, then use the + and – buttons to set the
desired temperature in the range of 41-95°F. The + and – buttons will
increase or decrease the temperature by 1°F. Press gear button
once to confirm the setting.
Once setting the timer or temperature, the digital display will read the
current room temperature & automatically maintain the set
temperature setting by turning on & off the heating elements during
the set time.
ECO FUNCTION:
The ECO function automatically sets the default temperature to 71.6°F. If the room
temperature is lower than 64.4°F, the heater will use the high temperature setting, on
automatically; Once the room temperature is higher than 64.4°F, the heater will
automatically switch to the low heat setting; Once room temperature reaches 71.6°F,
the heater will shut off & the digital display will show “EC”.
REMOTE CONTROL
There are 6 buttons on the remote control equivalent to the control panel on the device.
The maximum signal range of the remote is 15ft. If there is a barrier blocking the transmission
signal from the remote to the heater, the signal may not be transmitted at all.