5
ASSEMBLY
WARNING:
Do NOT use this tower heater if any part has been under water.
Immediately contact Crane Customer Care or a qualified electrician to inspect or replace
the heater if necessary. Keep plastic wrapping away from children.
1.
Open the packaging, take the unit out and unscrew the Cover Fixer.
Be responsible when handling the packing materials.
2.
Insert the Glass Base into the bottom of the unit and screw on the Cover Fixer.
3.
Place the unit upright on a flat floor before use.
OPERATION AND USE
1.
Place the heater on the floor in the desired location.
WARNING:
Keep combustible materials – such as furniture, pillows, bedding,
papers, clothes and curtains —at least 3 feet from the front of the heater. Also
keep them away from the sides and rear.
2.
Ensure that the heater’s Power is Off.
3.
Plug the heater into a 120VAC outlet. This heater has a
polarized plug ((one blade is wider than the other). As a
safety feature to reduce the risk of electrical shock, this
plug is intended to fit in a polarized outlet only one way.
If the plug does not fit fully in the outlet, reverse the plug.
If it still does not fit, contact a qualified electrician. Do not
attempt to defeat this safety feature.
4.
Choose your desired heater setting (below) and enjoy your new tower heater.
Power Button
(at the bottom of rear cover under the removable air filter)
To power on, press the power button to “I” position. Press the button to “0” position to
turn off the heater.
ON/OFF (Stand-By) Key
Pressing the “
” key will turn on the power indicating light. The unit starts operation at
low heating power (800W). Pressing the key again will stop the unit and bring the
heater into standby - the power indicating light will be off.
To turn OFF completely the unit, press the power button to “0”.
Heater Button (Power Level Setting)
While the product is on, touch the “
” key to adjust the power setting. When high
power is on, the LED indicator will be showed as “1500W”. Pressing the key again for
low power will switch the LED indicator to show “800W”.
Swing
Button (Horizontal Oscillation)
While the unit is on, press the “
” key and it will turn left or right automatically. At
the same time, the LED indicator will be on. Pressing the key again will stop the
oscillation and turn off the LED light.