Crane EE-6919, Manual

Page: 8 / 13

6
ASSEMBLY & USE
IMPORTANT:
Remove plastic from filter before the first use of the humidifier.
1. Place water tank onto the base of the unit and gently press down to secure the
water tank onto the base.
2. Open the water tank cover. Fill water tank with clean, cool water. Securely close the
water tank cover.
ALWAYS use fresh cool (room temp) water when operating the
humidifier.
DO NOT fill water all the way to the rim.
DO NOT use hot water.
DO NOT
add any medication, essential oils, salt, or additives to the water tank.
DO NOT pour water into Mist Outlet Channel.
Note: Do not attempt to move the humidifier while Water Tank is placed on the
Humidifier Base. Doing so may cause leakage of water and/or Humidifier Base to
overfill.
3.
Plug the power cord into a wall outlet.
4. : press to turn power on and off. When power is on, cool mist will begin to rise
from the mist lid at the highest mist level setting.
Note:
When the power is on the digital display panel will show the current humidity
reading and the air temperature.
5.
: Press to program desired humidity level from 45%-95%. The humidifier will
adjust the level of mist to maintain desired humidity setting. Display will flash 5 times
to confirm setting.
AUTO: 00 indicates AUTO Mode. This will cancel the humidity setting and the unit will mist
continuously.
6.
:
Press to change the mist output from low or high. The humidifier always starts
at high when powering on.
7. : Press to set the timer from 1-12 hours. Each press will raise the timer by 1 hour.
Display will flash 5 times to confirm setting.
8.
:
Press this to turn on UV-C and Ionizer:
1
st
press: UV-C ON 3
rd
press: UV-C OFF
2
nd
press: Ionizer ON 4
th
press: Ionizer OFF
SET THE CORRECT HUMIDITY OUTPUT
: To reduce excessive humidity or condensation
especially in small rooms, leave the room door open and adjust mist intensity to low
with the Mist Setting Icon.
NOTE:
As a safety feature, when the humidifier runs out of water it will beep three times
and p
ower off.
Fan will continue to blow for 1 minute to clear any mist in the mist chamber.