Crane EE-5067, Manual

Page: 8 / 12

8
OPERATION & USE
OPERATING INSTRUCTIONS:
1. Press Power Button to turn on and off the unit.
2. Press Fan Button to select Low, Medium, High or Max. Press once for Low, press
twice for Medium, press three times for High and press four times for Max. All lights
will illuminate on the Max setting.
3. Press Sleep Button to control Sleep Mode. Press once to turn on Sleep Mode. Press
two times to de-activate Sleep Mode. In Sleep Mode the light blinks 10 times and all
indicator lights will go off. When the purifier goes into sleep mode the fan setting
automatically defaults to Low. To de-activate the sleep mode press any button on
the control panel.
NOTE: Once item is unplugged the sleep mode needs to be reset
4. Press the Timer Button to operate in intervals of 2 hours, 4 hours and 8 hours. The
unit will turn off when scheduled operating time has elapsed. To go back to a
continuous run time, press the timer button until there are no more indicator lights
lit up.
IMPORTANT NOTE:
When the unit is not in use, please turn the unit off and unplug
.
REPLACING THE HEPA FILTER
When the Filter Reset light blinks continuously, it is an indication to replace the filter.
Once you have replaced the filter, hold the POWER button down for 5 seconds to reset
the system. On average, the HEPA Filter needs to be replaced every 3-6 months. Filter
life will depend on air quality and usage.
1. ALWAYS turn off and unplug the air purifier from power outlet before replacing
the filter.
2. Turn the unit upside down, unscrew the base cover. Unwrap the washable
particle filter from the HEPA filter
3. Discard the old HEPA filter. DO NOT attempt to wash the HEPA filter. Wrap the
washable particle filter on the new HEPA filter. Insert the filters into the unit.
4. Once you have replaced the filter, screw the base cover back on and turn the unit
right side up. Hold the POWER button down for 5 seconds to reset the system.
NOTE:
Replacement HEPA Filter #HS-1944 can be purchased online at www.crane-
usa.com .