7
SINGLE PHASE INSTALLATION
A.
Motor Control —
A motor control (capacitor) box is
furnished with single phase pumps, and should be
mounted in a convenient location.
1)
An across-the-line magnetic starter, as described
above, is required to provide overload protection
for the motor.
B.
Motor —
Refer to motor description and cable
identifi cation on Page 4. Connect the three power
leads of the power cable to the motor control box and
the ground wire to ground. install and connect power
leads from the motor control box to the starter.
1) Connect the two leads marked P1 and P2 of the
control cable to the CONTROL CIRCUIT of the
starter. See Wiring diagrams Figures 3 & 4.
C.
Liquid Level Control System, see Page 7.
D.
See Starting, Page 7.
Figure 2
Figure 3
Figure 4
